All Products

Non-Metallic 3/4-Inch Straight Liquid-Tight Connector

The customized Non-Metallic 3/4-Inch Straight Liquid-Tight Connector, 5-Pack descrptions: 1.Screw directly onto the conduit, without requiring disassembly 2.Produced from UL rated plastic for long outdoor life 3.Can be secured to conduit while fully...

Non metallic Liquidtight Fittings

The customized Non metallic Liquidtight Fittings descrptions: 1.Liquidtight, raintight, oiltight for protection and long life in wet, dusty and corrosive environments 2.Hex shaped gland nut allows for easy wrenching, providing a fast, tight...

GENERAL PLASTIC FLAT CABLE PLASTIC GLAND KIT

The customized GENERAL PLASTIC FLAT CABLE PLASTIC GLAND KIT, UL Listed descriptions: Fire-retardant plastic gland kit for terminating cable in consumer units. Simple screw-fit, locknut included. 1.IP68 Seal 2.Fire-Retardant 3.Vibration-Resistant...

Non-Metallic Electrical Liquid Tight Conduit

The customized Non-Metallic Electrical Liquid Tight Conduit Straight Fittings, UL Listed descriptions: 1.These Non-Metallic connectors are molded of Type Nylon 6 2.Lower Install Costs with Smooth Internal Surfaces for Easier Wire Installation 3.O...

Liquid-Tight Strait Connector 1/2 In

The customized Liquid-Tight Strait Connector 1/2 In, UL Listed descriptions: To terminate non-metallic liquid-tight conduit. 1.Non-metallic 2.Supplied with O ring and locknut 3.1/2" 4.Nonmetallic 5.Bag of 1 1.No-nmetallic Liquid Tight...

Liquid Tight Straight Conduit Connector

The customized No-nmetallic Liquid Tight Straight Conduit Connector, UL Listed descriptions: 1.No-nmetallic Liquid Tight Connector-Straight 2.UL list 3.Straight Nonmetallic liquid-tight connectors are used to terminate andseal Liquid -Tight Flexible...

3/4 in. PVC Male Adapter

The customized 3/4 in. PVC Schedule 40 MPT x S Male Adapter descrptions: 1.PVC Sch. 40 fitting are for pressure systems where temperatures will not exceed 140°F. They are highly resilient, with high-tensile and high-impact strength. PVC Sch. 40 has...

UL Liquid Tight Electrical Conduit Kit

The customized Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight descriptions: 1.Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings 2.Conduit is Flexible - Can be used in...

UL-Rated Plastic Liquidtight Connector 1-1/2-Inch

The customized UL-Rated Plastic Non-Metallic 45-Degree Liquidtight Connector 1-1/2-Inch descrptions: 1.The Non-metallic 45-Degree liquidtight connector with 1-1/2-Inch trade size, has a thread length of 0.653-Inch. 2.Liquidtight connector with...

Non-Metallic Liquid-Tight Push-On Connector

The customized 1/2 in. Non-Metallic Liquid-Tight Push-On Connector descrptions: 1.The Arlington Industries, INC 1/2 in. Non-Metallic Liquid-Tight Push-On Connector is constructed of UV-rated plastic for a long-lasting, outdoor life. The connector is...

Pvc Male Terminal Adapter 1-1/4

The customized Pvc Male Terminal Adapter Threaded 1-1/4 " Ul Schedule 40descrptions: 1.Application: Joining lengths of conduit pipe 2.Knockout Original Size: 1-1/4 in. 3.Knockout Reduced Size: 1-1/4 in. 4.Schedule Type Number: 40/80 5.Connector...

1-1/4-in Conduit Connector Conduit Fittings

The customized 1-1/4-in Conduit Connector Conduit Fittings descriptions: 1.The 1-1/4 in. Meter offset brings service into a meter box. Made of non-metallic PVC, the offset features ridges on the outside for concrete encasement and is designed for...

PVC Pipe Electrical Conduit Fittings

The customized PVC Pipe Electrical Conduit Fittings, UL Listed descriptions: 1.Its product lines expanded into several major categories: 2.Electrical distributors and contractors were provided with a broad line of PVC conduit and fittings. 3.Power...

1/2 in. Male Terminal Adapter

The customized 1/2 in. Male Terminal Adapter descrptions: 1.The Male Terminal Adapter is a connector used to transition from plain end PVC conduit to conduit with a threaded metal end or PVC female bell end. The adapter can be used to connect...

No-metalic liquid tight fittings

The customized Sealproof 2-Inch 2 Pack Non-Metallic Liquid-Tight 90-Degree Conduit Connector Fitting descrptions: 1.All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6....

Non-metallic Liquid Tight fittings

The customized Non-metallic Liquid Tight Straight Electrical Conduit Connector Fitting descrptions: 1.All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability...

Sealproof Non-metallic Connector Kit

The customized Sealproof Non-metallic Connector Kit descriptions: 1. Use with Sealproof straight or right angle connectors; can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or...

Customized 2 inch pvc connectors for

Timeplex Industrial Limied can provide the series plastic or PVC connectors base on the customised drawings. we built using PVC parts and are easy to assemble, and best of all, can be built to fit any size of garden that you can think of. The...

The Plastic components for the automotive industry

China is the world’s largest manufacturing country and has a complete, independent and complete modern industrial system. The output of more than 220 kinds of industrial products in China and rank the first in the world, if you are looking for OEM...

led driver metal ballast

1,Timeplex is one of the leading manufacturers of metal stamping, plastic injection, heatsink,home appliance products,R/C drones, smart electronic toys, complete the solution for OEM/ODM products and components. It's founded in 1989 , located in...

The Emi Shielding can Products

Electromagnetic interference (EMI) shielding and attenuation components are critical to EMC specifications. Designers will address EMI interaction within a board or system by slowing clock speeds, modifying data line structures or using shielding...

The EMI/RFI shielding metal housing

There are a wide variety of materials used to create EMI and RFI shielding. However, the EMI shielding process requires a conducting surface, so it uses almost only metal. Those metals used for shielding services must also have high magnetic...

ABS red plastic components

First point is size the crane to the MAX mould weight your largest press can support; you'll end up with that one mould that will be set in halves if you don't. Tie bar pullers for large machines. Standardize EVERYTHING! Water, power, valve gates,...

Plastic injection case for custom

Precision Injection Mold Technology in China The development of precision injection molds, precision injection molding was first produced in the 1970s. With the development of science and technology has been widely used, many industrial developed...